 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) TS3V3702 3V MICROPOWER DUAL VOLTAGE COMPARATORS . . . . . . . . DEDICATED TO 3.3V OR BATTERY SUPPLY (specified at 3V and 5V) PUSH-PULL CMOS OUTPUT (NO EXTERNAL PULL-UP RESISTOR REQUIRED) EXTREMELY LOW SUPPLY CURRENT : 7 A typ / comparator WIDE SINGLE SUPPLY RANGE 2.7V TO 16V EXTREMELY LOW INPUT CURRENTS : 1pA TYP INPUT COMMON-MODE VOLTAGE RANGE INCLUDES GND FAST RESPONSE TIME : 2s typ for 5mV overdrive PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR LM393 N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) ORDER CODES Part Number TS3V3702I Temperature Range -40 C, +125 C o o Package N * D * PIN CONNECTIONS (top view) Output 1 1 2 3 4 + + 8 7 6 5 V CC + Output 2 Inverting Input 2 Non-inverting Input 2 DESCRIPTION The TS3V3702 is a micropower dual CMOS voltage comparator with extremely low consumption of 7A typ / comparator (20 times less than bipolar LM393). The push-pull CMOS output stage allows power and space saving by eliminating the external pull-up resistor required by usual open-collector output comparators. Thus response times remain similar to the LM393. November 1999 Inverting Input 1 Non-inverting Input 1 VCC - 1/6 TS3V3702 SCHEMATIC DIAGRAM (for 1/2 TS3V3702) VCC + T10 T1 T2 T9 T17 R1 Input T3 T4 T11 T12 Input + T18 T21 Output T 13 T8 T19 T20 T5 T6 T7 T14 T15 T16 VCC - MAXIMUM RATINGS Symbol VCC Vid Vi VO IO Toper Tstg Notes : 1. 2. 3. 4. + Parameter Supply Voltage - (note 1) Differential Input Voltage - (note 2) Input Voltage - (note 3) Output Voltage Output Current Operating Free-Air Temperature Range TS3V3702I Storage Temperature Range Value 18 -18 Unit V V V V mA o 18 18 20 -40 to +125 -65 to +150 C C o All voltage values, except differential voltage, are with respect to network ground terminal. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. The magnitude of the input and the output voltages must never exceed the magnitude of the positive supply voltage. Short circuit from outputs to VCC+ can cause excessive heating and eventual destruction. OPERATING CONDITIONS Symbol VCC + Parameter Supply Voltage Common Mode Input Voltage Range Value 2.7 to 16 0 to VCC -1.5 + Unit V V Vicm 2/6 TS3V3702 ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, Tamb = 25C (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage - (note 1) Vic = 1.5V Tmin. Tamb Tmax. Input Offset Current - (note 2) Vic = 1.5 V Tmin. Tamb Tmax. Input Bias Current - (note 2) Vic = 1.5 V Tmin. Tamb Tmax. Input Common Mode Voltage Range Tmin. Tamb Tmax. Common-mode Rejection Ratio Vic = Vicm min. Supply+ Voltage Rejection Ratio VCC = 3V to 5V High Level Output Voltage Vid = 1V, IOH = -4mA Tmin. Tamb Tmax. Low Level Output Voltage Vid = -1V, IOL = 4mA Tmin. Tamb Tmax. Supply Current (each comparator) No load - Outputs low Tmin. Tamb Tmax. Response Time Low to High Vic = 0V, f = 10kHz, CL = 50pF, Response Time High to Low Vic = 0V, f = 10kHz, CL = 50pF, Overdrive = 5mV TTL Input Overdrive = 5mV TTL Input 2 1.8 0 to VCC -1.2 + 0 to VCC -1.5 80 dB 75 V 2.4 mV 300 400 450 20 25 A + Min. Typ. Max. 5 6.5 Unit mV Iio pA 1 300 pA 1 600 V dB Iib Vicm CMR SVR VOH VOL ICC 7 tPLH tPHL 1.5 0.7 2.2 0.15 s s Note : 1. The specified offset voltage is the maximun value required to drive the output up to 4.5V or down to 0.3V. 2. Maximum values including unavoidable inaccuracies of the industrial test. 3/6 TS3V3702 ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = 0V, Tamb = 25 C (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage - (note 1) Vic = 2.5V Tmin. Tamb Tmax. Input Offset Current - (note 2) Vic = 2.5 V Tmin. Tamb Tmax. Input Bias Current - (note 2) Vic = 2.5 V Tmin. Tamb Tmax. Input Common Mode Voltage Range Tmin. Tamb Tmax. Common-mode Rejection Ratio Vic = Vicm min. Supply Voltage Rejection Ratio + VCC = +5V to +10V High Level Output Voltage Vid = 1V, IOH = -4mA Tmin. Tamb Tmax. Low Level Output Voltage Vid = -1V, IOL = 4mA Tmin. Tamb Tmax. Supply Current (per comparator) No load - Outputs low Tmin. Tamb Tmax. Response Time Low to High Vic = 0V, f = 10kHz, CL = 50pF, Response Time High to Low Vic = 0V, f = 10kHz, CL = 50pF, Overdrive = 5mV TTL Input Overdrive = 5mV TTL Input 4.5 4.3 0 to VCC -1.2 0 to VCC + -1.5 80 dB 90 V 4.7 mV 200 300 375 mA + Min. Typ. 1.2 Max. 5 6.5 Unit mV Iio pA 1 300 pA 1 600 V dB Iib Vicm CMR SVR VOH VOL ICC 9 20 25 s s tPLH tPHL 1.5 0.7 2.2 0.15 Note : 1. The specified offset voltage is the maximun value required to drive the output up to 4.5V or down to 0.3V. 2. Maximum values including unavoidable inaccuracies of the industrial test. 4/6 TS3V3702 PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP Dimensions A a1 B b b1 D E e e3 e4 F i L Z Min. 0.51 1.15 0.356 0.204 7.95 Millimeters Typ. 3.32 Max. Min. 0.020 0.045 0.014 0.008 0.313 Inches Typ. 0.131 Max. 1.65 0.55 0.304 10.92 9.75 2.54 7.62 7.62 6.6 5.08 3.81 1.52 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 3.18 0.125 5/6 TS3V3702 PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Dimensions A a1 a2 a3 b b1 C c1 D E e e3 F L M S Min. 0.1 0.65 0.35 0.19 0.25 4.8 5.8 Millimeters Typ. Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45o (typ.) 5.0 6.2 Min. 0.004 0.026 0.014 0.007 0.010 0.189 0.228 Inches Typ. Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.197 0.244 1.27 3.81 3.8 0.4 4.0 1.27 0.6 8 (max.) o 0.050 0.150 0.150 0.016 0.157 0.050 0.024 Informationfurnishedis believed to be accurateand reliable. However, STMicroelectronicsassumes no responsibilityfor the conse quences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specificationsmentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. (c) http://www.st.com 6/6 |
Price & Availability of TS3V3702
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |